产品分类
您现在的位置:首页 > 产品展示 > 皮带输送机保护装置 > 溜槽堵塞检测开关 > HQDM-1Chute blockage etection switch

Chute blockage etection switch

产品时间:2019-06-25

简要描述:

HQM-1Chute blockage etection switch ,湖北杭荣电气有限公司,,一年,,全款供应,湖北杭荣电气有限公司是一家主要从事接近开关、光电开关、Hall IC霍尔开关、霍尔元件、两级跑偏开关、双向拉绳开关、速度监测器、皮带打滑开关、阻旋料位、皮带纵向撕裂开关、矿用磁性井筒开关、倾斜开关,溜槽堵塞、声光器、限位开关

HQM-1Chute blockage etection switch【技术参数说明】

HQM-1Chute blockage etection switch【运费说明】

HQM-1【规格书】

HQM-1【产品参数说明】

HQM-1【湖北杭荣】

Supply chute blockage etection switch LM-X, EXLM-X Explosion chute plug etector

HQM-1溜槽堵塞检测装置 LM-X溜槽堵塞检测装置的产品说明信息可能还不够细致和,如果您需要更详细了解LM-G溜槽堵塞检测装置 LM-X溜槽堵塞检测装置的相关信息或索取相关资料,欢迎随时与我!

LM溜槽堵塞检测装置型号 溜槽防堵装置厂家 溜槽防堵装置 溜槽堵塞检测装置安装与接线 LM-G溜槽堵塞检测装置 LM-X溜槽堵塞检测装置 溜槽堵塞检测装置开关

溜槽堵塞检测装置用途:

LM型溜槽堵塞检测装置,用于检测带式输送机溜槽或漏斗物料畅通情况,当物料堆集过多造成堵塞时会给溜槽侧壁一定压力,使安装在漏斗侧面的检测装置的活动门开启,使行程开关动作发出信号停机,避免恶性事故发生。

溜槽堵塞检测装置特点:

该检测仪采用侧压活动门式动作结构,压簧使压门在故障后即可复位,背部开门,使接线、安装及检测极为方便,采用了密封的检测开关,提 ,动作力为5公斤,极限行程为23,本机整体采用喷塑工艺,防止腐蚀;

溜槽堵塞检测装置主要技术指标:

触头数量:1常闭、1常开

触头容量:AC 380V 3A

动作行程:5~15mm

极限行程:20mm

环境温度:-30~+40℃

相对湿度:≤90%(25℃时)

动作力:35~40N

:IP54

溜槽堵塞检测装置安装:

1. 该机应成对安装在溜槽相对的两个侧壁上,一般安装在溜槽底部向上三分处,作为轻堵塞信号检测。底部向上三分之二处作为重堵塞信号检测。

2. 选择好安装位置后开一个260mm×260mm方口,然后在开口处上方约100~200mm处溜槽内壁焊接一块300×80×850(mm)挡板,以防大块物料落下直接撞击活动门而发生误动作。

3. 请将随机配套的弹力橡胶板将开口*覆盖,封闭,将弯角件焊接在溜槽内壁上,然后用M12×25螺钉溜槽堵塞检测装置与弯角件固定好。

接线:本装置引出一条长1.5米左右的电缆线,按其芯线排号接线.1、2为常闭接点;1、3为常开接点。

溜槽堵塞检测装置工作原理及性能:

溜槽堵塞检测装置为门式结构,有压簧复位功能。外壳用铁板制造,经喷漆及防腐蚀处理为户外型。整机结构合理,性能。

工作原理:当漏斗或溜槽物体堆集过多和物体过大不畅通造成溜槽堵塞时,堆积物料给漏斗侧壁一定压力,安装在漏斗或溜槽上的活动门在压力作用下活动门开启,使行程开关动作,发出停机信号,排除故障后开关复位。

Larger photo of automa ispenser

Company:Jie Hang, Yueqing City Electric Co., Lt.Information Name:Supply chute blockage etection switch LM-X, EXLM-X Explosion chute plug etectorUpate Time:2013-10-10Valiity:9999Specifications:LM-XQuantity:500.00Pri escription:RMB/
 LM-X, EXLM-X chute plug etector, blocking coal sensor, chute state etector, chute plug Sensor Prouct escription: LM-X-type chute plug etector switches for conveyor systems chute has occurre blocke, if blocke, the etector can etect the machine through the acss line failure signals, such as the fault signal is connecte to the use of electrical light or soun, an can emit light or soun signals. How it works: The material runs the chute clogge, the accumulation of material on the chute walls generate pressure, so that the activities of the etector signals the movement of the oor, when the clogging material remove, the oor automatically spring back into pla so that the activities. Main features: The etector uses sie pressure activity gantry movement structure, the pressure spring oor can be reset after the fault is cleare, the back oor, so that wiring, installation an testing is extremely convenient, with a high seale etection switch, improve anti- - protection level, the action for of 5 kg, the limit stroke of 23, the unit as a whole using spray technology, increase corrosion. Specifications ︰ conveyor bulk material hanling systems, chute plug is a more common phenomenon, it is often nessary after stopping by the fiel staff of the chute for reging pross, affecting the normal prouction an increase the lor intensity, resulting in unnessary economic losses. Z-□ Series rappers warehouse wall, can be use in material hanling systems, effectively exclue ue to the hygroscopic material, charge asorption, crystallization causes of congestion, sticky wall, oming an other faults, you can ensure safety in prouction, improve transport efficiency. The proucts are wiely use in metallurgy, electric power, mining, chemical an other inustries. Z-□ series rapping warehouse wall control box an chute etector with the use of reaily etect an prevent the occurren of failure chute blockage an improve the egree of automation. The evi has phase loss, over-current, short circuit protection, also has power inicator, limit owntime instructions, fault alarm functions. LM-X, chute plug etection evi chute plug etector switches for conveyor systems reprint link chute, hopper security protection for etecting clogging materials, conveyor system is essential for safety evis. One, chute plug etector works chute plug etector mounte on the sie wall of the chute when the chute blockage occurs, the accumulation of material activities must squeeze the oor, an to offset the start of the trip switch, an alarm or shutown signal . Troubleshooting, activities uner the action of the compression spring oor automatically reset. Secon, chute plug etector structural characteristics of the etector gate structure using lateral pressure activities, troubleshooting, spring thrust the active oor automatic reset; cast aluminum housing with a heavy coating micro switch contacts, high sensitivity, for Just 0.9kg trigger switch the machine can use importe limit switch, sensitive, an high reliility. Thir, the technical parameters chute plug etector operating angle 5 °, the limit angle of 10 °. Contact capacity: 1A/125 (C); 5A/250V or 380V (AC). Housing: ust, corrosion an rain. Protection class: . Contact Number: one normally open an one normally close (accoring to user nee to increase the number of switches) switch accoring to user nees acss to normally open or normally close form. Ambient temperature: -20 ~ 60 ℃.

Contact etail

Company Name:Employee Number:Annual export:Year Estlishe:Contact Person:ephone Number:Company Aress:Zip/Postal Coe:438300

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7